1-12 | 12-24 | 24-36 | 36-48 | 48-60 | 60-72 | 72-84 | 84-96 | 96-108 | 108-120 | 120-132 | 132-144

This panel was rearranged from existing panels. The background bitmap is based on a real panel picture. All the main gauges (throttle quadrant, radio stack, overhead panel) are displayed on the main panel. Landing, taxi, logo, panel, strobe, bcn and nav light switches, pitot heat, yaw damper, wing ice, oil temp and exhaust gas temp gauges, no smoking and seatbelt switches, auto start and engine start buttons can all be viewed on the overhead panel that is above the main panel.

FS2004 Panels Zip file:tungv1.zip File size:5.9MB By:Targan Unutaz >>Download zip file

DC-9 custom panel add-on for FS2004.

FS2004 Panels Zip file:dc9cjp2.zip File size:4.1MB By:Chris Jeanne >>Download zip file

The default FS2004 DC-3 is configured for three fuel tanks, whereas by design the C-47/DC-3 had four from which to draw. Many airlines using the DC-3 commercially blanked off, removed or never installed one tank in order to maximise payload; they were usually operating shorter routes than were typical of the C-47 in military service, This conversion kit gives the option of restoring the aircraft to four-tank configuration, giving greater range for long duration flights.

FS2004 Panels Zip file:dc3_4tk.zip File size:877KB By:Dave Bitzer and Mark Beaumont >>Download zip file

For four-tank operation, this gauge may be of interest to those pilots who like to fly without checking the "Enable automixture" function in the "Aircraft/Realism Settings" pull-down menu, but want more DC-3 realism than can be achieved with FS2004's simulation of mixture control.

FS2004 Panels Zip file:dc3_4mx.zip File size:501KB By:Dave Bitzer and Mark Beaumont >>Download zip file

For three-tank operation, this gauge may be of interest to those pilots who like to fly without checking the "Enable automixture" function in the "Aircraft/Realism Settings" pull-down menu, but want more DC-3 realism than can be achieved with FS2004's simulation of mixture control.

FS2004 Panels Zip file:dc3_3mx.zip File size:319KB By:Dave Bitzer and Mark Beaumont >>Download zip file

Sub-panel with Cowl Flaps Adjustment Knobs for Twin Engines with working cowl flaps (i.e., C119, DC-3)

FS2004 Panels Zip file:cowl_dual_pnl.zip File size:319KB By:Brent Hricziscse >>Download zip file

Includes Captains's Seat With lighting effects that look as good during the day as at night. Has many extra gauges. Works well with the default 747-400 and should be OK with any 4 engine Jet.

FS2004 Panels Zip file:CJH_747_pnl_01.zip File size:7.4MB By:Chris Hutchings >>Download zip file

Includes 1st Officer's and Engineer's seat. This panel allows you to literally move from one position to another, loading a different Panel.cfg each time.

FS2004 Panels Zip file:CJH_747_pnl_02.zip File size:4.8MB By:Chris Hutchings >>Download zip file

This part is optional - Includes Upstairs Cabin With lighting effects.

FS2004 Panels Zip file:CJH_747_pnl_03.zip File size:6.2MB By:Chris Hutchings >>Download zip file

This part is optional - Includes Downstairs Cabin. With lighting effects. Downstairs has an opening door that lines up exactly with the door on the default 747.

FS2004 Panels Zip file:CJH_747_pnl_04.zip File size:4.7MB By:Chris Hutchings >>Download zip file

Boeing 757/767 panels for fs2004. Includes custom gauges and sounds.

FS2004 Panels Zip file:767cjpn.zip File size:5.4MB By:Chris Jeanne >>Download zip file

Package includes all new photo-realistic gauges and bitmaps.

FS2004 Panels Zip file:concpan.zip File size:8.5MB By:Pedro Oliveira >>Download zip file

Report bad links here